This document describes the limited warranty agreement (‘Warranty’) of the sales organization Befe Limited Company (hereinafter referred to as ‘DripPro™’) regarding your (hereinafter referred to as the ‘Buyer’) purchase of DripPro™ Agricultural Irrigation Systems and Parts Products.

The agreement is subject to the conditions described below and subject to the attached conditions (‘Conditions limited warranty’). DripPro™ is not obliged to notify any Buyer, or future Buyer, after a certain date about any possible amendments or the non-applicability of this limited warranty regarding the supplied products (hereinafter referred to as the ‘Products’). The Warranty as described below is subject to the limits and other herein described conditions and is subject to the conditions as attached to this document (‘Conditions limited warranty’). This warranty only applies to a sales agreement between DripPro™ and the Buyer in case it is referred to.

  1. Warranty period

In compliance with the provisions of Conditions limited warranty the Buyer has the right to guarantee during the applicable period.

Each product in your purchase comes with a warranty of 6 months minimum to 12 months maximum as indicated on the product sheet.

  1. Special conditions

The warranty period comes into effect on DripPro™’s date of invoice.

The warranty period is based on years of burning hours or amount of hours in function, depending on which occurs first.

The warranty only concerns products that are applied according to their ‘intended use’ or ‘normal use’, which means:

  • For luminaires, installed according to the installation manual, included in the packaging and available online on DripPro™’s website, AND The conditions of use are consistent with the information on the Products and the packaging, AND

  • Malfunctions as a consequence of basic causes, including but not limited to improper usage or installation or operation beyond the specified usage limits, are not covered by this Warranty, and this Warranty is void for and does not apply to this type of malfunctions as a consequence of basic causes.

  • The Products have been purchased directly from a DripPro™ (sales) organization.

  • Proof of Product purchase is available for inspection by DripPro™.

  • An adequate administration of the operation history is kept, which is - available for inspection by DripPro™.

  • The Buyer may not rely on any other information or documentation.

Conditions Limited warranty

1. Limited warranty

This warranty extends only to agricultural irrigation products provided with the DripPro™ brand (hereinafter referred to as ‘Product’) sold by BEFE Kalıp Sanayi Ticaret Limited Şirketi (hereinafter referred to as ‘DripPro™’) within Europe. The warranty exclusively concerns the party (hereinafter referred to as ‘Buyer’) that purchases the products from DripPro™ directly.

DripPro™ warrants that every Product be free of defects in material and production errors. The above warranty is valid for the period as mentioned in the applicable warranty agreement for the Products mentioned in your sales agreement. When a Product does not function conform this warranty, DripPro™ will provide a free replacement of the defective product with due observance to the applicable warranty policy and the conditions of the limited warranty as described below.

2. Conditions

DripPro™’s warranty applies only to the Buyer.

If a Product under warranty is returned by Buyer in compliance with section 3 and within the applicable warranty period as described in the warranty agreement and after investigation DripPro™ decides with certainty that Product does not fulfill these requirements, DripPro™ will, at its choice, repair or replace the Product or its defective part, or refund the purchase price to the Buyer.

For the sake of clarity, ‘repair or replace the Product or its defective part’ does not include removal- or installation work, costs or expenses which include but are not limited to labor costs or expenses. If DripPro™ decides to replace the product and this is not possible as it is no longer in production or available, DripPro™ can refund the Buyer or replace the Product with a comparable product (with possible minor deviations in design and product specifications).

No agent, distributor, or dealer is authorized to modify, adapt, or extend these warranty conditions.

This warranty only applies if the Product is installed correctly and is used within the operational values, operating range, and true conditions as indicated in the specifications, application guidelines, NCAAP standards or other documents provided with the Product. If a Product is deemed to be faulty, or does not function in correspondence to the product specifications, the Buyer must inform DripPro™ in writing.

DripPro™ will facilitate the technical solution of problems. Third party products sold by DripPro™ are not covered by this warranty, except where indicated in point 5.

This warranty does not apply to damage or breach of contract as a consequence of force majeure or abuse, incorrect use, abnormal use, or use in violation of an applicable standard, code, or user instructions, which include but are not limited to, as set out in the most recent security industry- and/or vehicle standards for the region(s) concerned.

This warranty is void if any person has performed or applied repairs or adjustments to the Product, which DripPro™ has not duly authorized in writing. The production date of the Product needs to be clearly legible. DripPro™ retains the right to take the final decision regarding the validity of a repair claim.

If requested by DripPro™, non-compliant or defective Products become property of DripPro™ after replacement.

3. Warranty claims

All mentioned warranty periods are under the condition of access to the Product or system by a DripPro™ representative to verify possible non-conformance. Claims under warranty must be reported and returned to DripPro™’s logistic center within 30 days from the date of detection, as mentioned in the return form which can be found on the website www.DripPro.com, and need to specify at least the following information (additional information can be requested):

  • Details of the defective Products; and for System warranty also details of other used components;
  • Purchase date, invoice date;
  • Detailed problem description, number and %, date and code of defects Application, operating hours, and amount of switching cycles;
  • Photos (and videos if possible) of defective product.
  • When a warranty claim is justified, DripPro™ will pay for shipping expenses.
  • DripPro™ can charge Client for returned Products that are not found to be defective or non-conforming, in addition to shipping-, test-, and handling costs associated therewith.

4. No implied or other warranties

The warranties and remedies included in this warranty contain the only warranty given by DripPro™ with regard to the Products and are in lieu of all other warranties, expressed or implied, including but not limited to warranties of merchantability or fitness for a particular purpose, which warranties are hereby rejected.

If DripPro™ has repaired or replaced a Product no new warranty period will commence, but the remainder of the original warranty period will continue to apply.

These conditions set out DripPro™’s entire liability and obligation to Buyer and the sole and exclusive remedy of Buyer related to defective or non-conforming Products delivered to Buyer by DripPro™, regardless whether this damage is based on a warranty not explicitly mentioned in these conditions, tort, contract, or other legal theory, even if DripPro™ has been advised or is aware of these defects.

5. Limitations and conditions

This is a limited warranty, which excludes, among others: installation, provide access to products (scaffolding, elevators, etc.) and special, incidental, and consequential damage (such as loss of revenue/profits, damage to property or other costs not previously mentioned), and is further defined by the limitations and conditions set out in the relevant warranty agreement and these conditions.

DripPro™ representatives will be granted access to the defective Product, system, or application if requested, to verify possible non-conformance.

DripPro™ shall not be liable for expenses (whether or not by or of third parties) which have been made by Buyer without having notified DripPro™ of the defective Products and without DripPro™’s written permission to make expenses.

For products DripPro™ sells to Buyer, but are not provided with DripPro™’s name or sub-brands, DripPro™ does not provide any expressed or implied warranty, including but not limited to the warranty of merchantability or fitness for a particular purpose;

DripPro™ will however provide the Buyer with the warranties of the manufacturer of the relevant product if requested, but only to the extent permitted by law and relevant agreements.